The LEONI Draht GmbH has extended its product range by a well-established base material, i.e. by adding on wires and strands made of pure nickel. We can supply all customary sizes at single-wire diameters ranging from Ø 0.15 mm to Ø 0.51 mm.
Particular properties of Nickel
Nickel as a mineral in pure condition can hardly be found on our earth. For the most part, it has to be extracted from nickel-bearing ores in a rather cumbersome process. The first one to portray this element was a man named Axel Frederic Cronstedt, no earlier than in the middle of the 18th century. He was also its namesake.
Pure nickel maintains an extreme strength and durability at high temperatures, coupled with a good resistance level, even up to the point of downstream processing. At the same time, it has a comparatively high temperature coefficient of resistance (at 0.00600 1/°C) without losing its good conductivity of von 20% IACS. At room temperature, Nickel endures environmental influences such as air, water, hydrochloric acids and leaches well.
Technical data of Nickel
- Chemical element
- Symbol “Ni“
- Specific weight 8.90 g/cm³ (at 20°C)
- Melting point 1726 K (1453°C)
- Resistivity 0.096 ohm mm²/m
- Electrical conductivity 13.9 * 106 A/(V*m)
- Corrosion-proof and very resilient towards alkali, salt spray and corrosive chemicals
Fields of application for nickel in general
Due to its outstanding resilience towards corrosive chemicals, Nickel or at least nickel-plated products are often used for making devices and tools related to the chemical industry. Nickel is widely used as an alloy material for coins and the refinement of steel. Adding on nickel leads to an improved corrosion resistance, hardness, strength and ductility in these cases.
The corrosion resistance mentioned above, but also its strength and durability even at extreme temperatures make nickel a most suitable coating material for copper wire. At a plating thickness of 27% of the total product weight, a temperature resistance of up to 750°C can be reached (find out more about this topic in our specialist article on 27% nickel)
Wires and strands made of pure nickel and nickel alloys
Electrical conductors out of nickel alloys (e.g. LEONI Histral® R59, Konstantan) are mainly used as heating conductors (find out more about this topic in our specialist article on heating applications).
Pure nickel conductors are well-suited for those applications that require an even higher temperature resistance, e.g. in heating coils for spark plugs or lead wires for heating conductors. Moreover, Nickel features a relatively high temperature coefficient of resistance (0.00600 1/°C while maintaining a conductivity of 20% IACS). This coefficient indicates by how much the resistance of a conductor increases when it is exposed to a change in temperature. Consequently, it can be determined whether there has been a change in the temperature at any point in the conductor by gauging its resistance without being forced to carry out a temperature measurement. The higher the temperature coefficient of resistance is, the more accurate the measurement will be. This aspect makes nickel an ideal conductor for control devices in extremely temperature-sensitive environments.
LEONI Histral® R20
- Pure nickel material 2.4060, Ni99,6
- Left-hand lay or right-hand lay
- Hard or soft condition
- Single-wire diameter from Ø 0.15 mm to Ø 0.51 mm
- 7-end or 19-end strands
Please contact us for other diameters or special constructions. If you have not yet purchased any pure-nickel wires or strands from us, just send us your product documentation or approach us about a product qualification.